Atmel products
  Home >  Xilinx Series Products

Xilinx Series Products

MYIR is a Xilinx Alliance Member, welcome to use MYIR's Xilinx products! 
We also offer custom design services, welcome your inquiry!

http://www.xilinx.com/alliance/memberlocator/1-2wv1bc.html 

 

Visit Partner SoMs on Xilinx

 

MYC-J7A100T System-On-Module
  • 69.6mm by 40mm (12-layer PCB design)
  • AMD/Xilinx XC7A100T Artix-7 FPGA
  • 512MB DDR3, 32MB QSPI Flash, 32KB EEPROM
  • DC-DC Power Management
  • 0.5mm Pitch 260-pin MXM Gold-finger-edge-card Connector
  • Supports Development by Xilinx's Vivado Design Suite
Read more...
 
 
MYC-CZU3EG/4EV/5EV-V2 System-On-Module
  • 60mm by 52mm (12-layer PCB design)
  • Xilinx Zynq UltraScale+ ZU3EG / ZU4EV / ZU5EV MPSoC
    - 1.2 GHz Quad Arm Cortex-A53 and 600MHz Dual Cortex-R5 Cores 
    - ARM Mali™-400MP2 Graphics Processor
    - 16nm FinFET+ FPGA fabric
  • 4GB DDR4 (64-bit, 2400MHz), 4GB eMMC, 128MB QSPI Flash
  • On-board Gigabit Ethernet PHY, USB PHY
  • Power Module, Clock Generator
  • Two Samtec 0.5mm pitch 160-pin Razor Beam High-Speed Headers
  • Ready-to-Run PetaLinux
  • Supports Xilinx Vitis Software Development Platform
Read more...
 
 
MYC-C7Z015 System-On-Module
  • 75mm by 55mm (12-layer PCB design)
  • 766MHz Xilinx XC7Z015 (Zynq-7015) dual-core ARM Cortex-A9 SoC + FPGA 
  • Dual-core ARM Cortex-A9 Processing System with Xilinx 7-series FPGA Logic
  • 1GB DDR3 SDRAM, 4GB eMMC, 32MB QSPI Flash
  • On-board Gigabit Ethernet PHY
  • Two 0.8mm pitch 140-pin Board-to-Board Expansion Connectors
  • Ready-to-Run Linux 
Read more...
 
 
MYC-C7Z010/20-V2 System-On-Module
  • 75mm by 55mm (10-layer PCB design)
  • 667MHz Xilinx XC7Z010 (Zynq-7010) dual-core ARM Cortex-A9 SoC + FPGA /
    766MHz Xilinx XC7Z020 (Zynq-7020) dual-core ARM Cortex-A9 SoC + FPGA
  • 1GB DDR3 SDRAM, 4GB eMMC, 32MB QSPI Flash
  • On-board Gigabit Ethernet PHY
  • Two 0.8mm pitch 140-pin Board-to-Board Expansion Connectors
  • Ready-to-Run Linux
Read more...
 
 
MYC-Y7Z010/20-V2 System-On-Module
  • 75mm by 50mm (10-layer PCB design)
  • 667MHz Xilinx XC7Z010 (Zynq-7010) dual-core ARM Cortex-A9 SoC + FPGA /
    766MHz Xilinx XC7Z020 (Zynq-7020) dual-core ARM Cortex-A9 SoC + FPGA
  • ARM Cortex-A9 Processing System with Xilinx 7-series FPGA Logic
  • 512MB DDR3 SDRAM, 4GB eMMC, 16MB QSPI Flash
  • On-board Gigabit Ethernet PHY (YT8521SH)
  • 1.27mm pitch 180-pin Stamp Hole Expansion Interface
  • Ready-to-Run Linux
Read more...
 
 
FZ5 Card - AI Accelerator Card
  • 107mm by 96mm (14-layer PCB design)
  • Xilinx Zynq UltraScale+ ZU5EV MPSoC (XCZU5EV-2SFVC784I)
    - 1.5 GHz 64 bit Quad-core ARM® Cortex™-A53 Application Processing Unit

    - 600MHz Dual-core ARM® Cortex™-R5 Real-time Processing Unit

    - ARM Mali™-400 MP2 Graphics Processing Unit (GPU)

    - H.264 and H.265 Video Codec Unit (VCU)

    - 16nm FinFET+ FPGA fabric

  • 4GB/8GB DDR4, 32GB eMMC, 64MB QSPI Flash, 32KB EEPROM
  • RS232, RS485, 4 x USB 3.0, Gigabit Ethernet, CAN, TF, DP, HDMI-IN, JTAG …
  • Computing Power up to 2.4TOPS, Runs at 55 FPS for ResNet-50
  • Supports 8- to 16-channel Video Decoding and 4- to 8-channel Intelligent Analysis
  • Ready-to-Run PetaLinux
  • Supports Baidu's PaddlePaddle Deep Learning AI Framework
Read more...
 
 
FZ3 Card - Deep Learning Accelerator Card
  • 100mm by 70mm (12-layer PCB design)
  • Xilinx Zynq UltraScale+ ZU3EG MPSoC (XCZU3EG-1SFVC784E)
    - 1.2 GHz Quad Arm Cortex-A53 and 600MHz Dual Cortex-R5 Cores 
    - ARM Mali™-400MP2 Graphics Processor
    - 16nm FinFET+ FPGA fabric 
  • 4GB DDR4 (64-bit, 2400MHz), 8GB eMMC, 32MB QSPI Flash, 32KB EEPROM
  • USB2.0, USB3.0, GigE, TF, DP, PCIe, MIPI-CSI, BT1120, USB-UART, JTAG …
  • Computing Power up to 1.2TOPS, MobileNet up to 100FPS
  • Ready-to-Run PetaLinux
  • Supports Xilinx Vitis Software Development Platform
  • Supports Baidu's PaddlePaddle Deep Learning AI Framework
Read more...
 
 
Z-turn Board V2 Single Board Computer
  • 63mm by 102mm (8-layer PCB design)
  • 667MHz Xilinx XC7Z010 (Zynq-7010) dual-core ARM Cortex-A9 SoC + FPGA /
    766MHz Xilinx XC7Z020 (Zynq-7020) dual-core ARM Cortex-A9 SoC + FPGA
  • 1GB DDR3 SDRAM, 16MB QSPI Flash, 64Kbit EEPROM
  • USB_UART, USB OTG, 1 x 10/100/1000Mbps Ethernet, CAN, HDMI, TF …
  •  Two 1.27mm pitch 80-pin SMT female connectors allow the availability of
    90/106 user I/O (7010/7020) and configurable as up to 39 LVDS pairs I/O
  • Three-axis acceleration sensor, Temperature sensor
  • Optional Camera and LCD Modules, IO Extension Board Z-turn IO Cape
  • Ready-to-Run Linux
  • Supports Python Development
Read more...
 
 
Z-turn Lite Single Board Computer
  • 63mm by 91mm (10-layer PCB design)
  • 667MHz Xilinx XC7Z007S (Zynq-7007S) single-core ARM Cortex-A9 SoC + FPGA
  • 667MHz Xilinx XC7Z010 (Zynq-7010) dual-core ARM Cortex-A9 SoC + FPGA
  • 512MB DDR3 SDRAM, 4GB eMMC, 16MB QSPI Flash
  • USB OTG, 1 x 10/100/1000Mbps Ethernet, TF, Debug UART, JTAG…
  • One 120 Position Connector Socket for Expansion interface
  • Optional Camera and LCD Modules, IO Extension Board Z-turn Lite IO Cape
  • Ready-to-Run Linux
Read more...
 
 
MYD-J7A100T Development Board
  • Based on MYC-J7A100T SOM
  • XC7A100T Artix-7 FPGA (XC7A100T-2FGG484I)
  • 512MB DDR3, 32MB QSPI FLASH, 32KB EEPROM
  • 2x Gigabit Ethernet, 2x SFP+, 1x PCIe, 1x USB-to-Uart, 1x TF Card Slot, 1x JTAG
  • HDMI Input and Output, DVP Camera Interface
  • Optional RPI Module (RS232/RS485) and Camera Module
  • Supports Development by Xilinx's Vivado Design Suite
Read more...
 
 
MYD-CZU3EG/4EV/5EV-V2 Development Board
  • Based on MYC-CZU3EG/4EV/5EV-V2 CPU Module
  • 1 x USB 3.0, 1 x Gigabit Ethernet, 1 x CAN
  • 1 x TF, 1 x PCIe, 1 x SATA
  • 1 x DisplayPort (DP)
  • 2 x PMoD, 1 x FMC, ARDUINO User Interface
  • 4 x SFP transceiver interfaces (up to 10Gpbs, only for EV Devices)
  • HDMI and LCD Display (HDMI signals reused with LCD)
  • Optional 7-inch LCD Modules, USB Camera Module and USB WiFi Module
  • Ready-to-Run PetaLinux
  • Supports Xilinx Vitis Software Development Platform
Read more...
 
 
MYD-SAMA5D3X Development Board MYD-C7Z015 Development Board
  • Based on MYC-C7Z015 CPU Module
  • 4 x USB Host, 1 x Gigabit Ethernet, 1 x CAN
  • 1 x XADC, 1 x FMC, 3 x PMoD, 1 x PCIe
  • 1 x SFP transceiver module with RJ45 interface (SFP-GE-T module)
  • TF Card Slot
  • HDMI and LCD Display
  • Optional 4.3- and 7-inch LCD Modules
  • Ready-to-Run Linux
Read more...
 
 
MYD-C7Z010/20-V2 Development Board
  • Based on MYC-C7Z010/20-V2 CPU Module
  • 4 x USB Host, 1 x Gigabit Ethernet, 1 x CAN
  • 1 x XADC, 1 x FMC
  • 3 x PMoD (only for XC7Z020)
  • TF Card Slot
  • HDMI and LCD Display
  • Optional 4.3 and 7 inch LCD Modules
  • Ready-to-Run Linux
Read more...
 
 
MYD-Y7Z010/20-V2 Development Board
  • Based on MYC-Y7Z010/20-V2 CPU Module
  • 1 x USB Host, 3 x Gigabit Ethernet, 1 x CAN
  • 1 x RS232, 1 x RS485
  • 1 x 2.54mm pitch 2 x 25-pin GPIO expansion header
  • TF Card Slot
  • Optional USB WiFi and USB Camera Modules
  • Ready-to-Run Linux
Read more...
 
 
FZ5 EdgeBoard AI Box
  • Rugged and Fanless AI Edge Computing Box with FZ5 Card
  • Xilinx Zynq UltraScale+ ZU5EV MPSoC (XCZU5EV-2SFVC784I) based on 1.5 GHz Quad Arm Cortex-A53 and 600MHz Dual Cortex-R5 Cores
  • 4GB/8GB DDR4 SDRAM, 32GB eMMC Flash, 64MB QSPI Flash, 32KB EEPROM
  • 4 x USB 3.0, Gigabit Ethernet, RS232, RS485, CAN, Micro-SD, Mini DP, HDMI-IN, Debug (USB-UART) …
  • Computing Power up to 2.4TOPS, Runs at 55 FPS for ResNet-50
  • Supports 8- to 16-channel Video Decoding and 4- to 8-channel Intelligent Analysis
  • Supports Running PetaLinux
  • Supports Baidu Baidu’s PaddlePaddle AI Framework
Read more...