To optimize the cost and lead time, MYIR has launched MYD-C7Z010/20-V2 for replacement of the MYD-C7Z010/20. The hardware is fully compatible. Please contact MYIR for any queries.
https://www.myirtech.com/list.asp?id=694
The MYD-C7Z010/20 development board is built
around the MYC-C7Z010/20 which is a compact Linux-ready ZYNQ-based SOM
(System on Module). The MYC-C7Z010/20 combines the Xilinx Zynq-7010 or Zynq-7020 SoC
device, 1GB DDR3 SDRAM, 4GB eMMC, 32MB quad SPI Flash, a Gigabit Ethernet PHY,
a USB PHY and external watchdog. It is connected to the MYD-C7Z010/20 base
board through two 0.8mm pitch 140-pin board-to-board connectors.
The
MYD-C7Z010/20 development board takes full features of the Zynq-7010 and
Zynq-7020 SoCs’ powerful dual-core ARM Cortex-A9 processing system and Xilinx 7-series Field Programmable Gate Array (FPGA) logic unit to create a rich set of peripherals to the base
board through headers and connectors including one RS232 serial port, four USB
Host ports, one Gigabit Ethernet port, CAN, HDMI, LCD/Touch screen,
TF card slot, RTC, one XADC header to allow
you take advantage of Xilinx XADC; it has three PMoD headers to meet your I/O
needs with PMoDs (only for 7020); it also has a low-pin count FMC connector to
allow various FMC cards for custom I/O options. User can integrate a MYC-C7Z010 or a MYC-C7Z020 SOM on
the same base board, thus making two variants of Zynq evaluation boards.
MYD-C7Z010 Development Board – with MYC-C7Z010 CPU Module for Xilinx XC7Z010
MYD-C7Z020 Development Board – with MYC-C7Z020 CPU Module for Xilinx XC7Z020
MYD-C7Z010/20 Development Board
The
MYD-C7Z010/20 development board is delivered with necessary cable accessories
and MYIR offers optional 4.3-inch and 7-inch LCD Module. The board is preloaded with Linux. It is a high-performance and low-cost development platform for
evaluation and prototype based on Xilinx Zynq-7000 All Programmable SoC family.
Features
Mechanical Parameters
-
Dimensions: 190mm x 110mm (base board), 75mm x 55mm (SOM)
-
PCB layers: 4-layer design (base board), 10-layer design (SOM)
-
Power supply: 12V/0.5A (base board), 5V/0.5A (SOM)
-
Working temp.: 0~70 Celsius or -40~85 Celsius (industrial grade)
The
MYD-C7Z010/20 Controller Board (MYC-C7Z010/20)
MYC-C7Z010/20 Top-view MYC-C7Z010/20 Bottom-view
SoC
-
Xilinx XC7Z010-1CLG400 (Zynq-7010) or XC7Z020-1CLG400/XC7Z020-2CLG400 (Zynq-7020)
- 667MHz ARM® dual-core Cortex™-A9 MPCore processor (up
to 866MHz)
- Integrated Artix-7 class FPGA subsystem
with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010)
with 85K logic cells, 53,200 LUTs, 220 DSP slices (for XC7Z020)
- NEON™ & Single / Double Precision Floating Point for each processor
- Supports a Variety of Static and Dynamic Memory Interfaces
Memory
-
1GB DDR3
-
4GB eMMC
-
32MB QSPI Flash (16MB is optional)
Peripherals and Signals
Routed to Pins
-
10/100/1000M Ethernet PHY
-
External watchdog
-
Three LEDs
- One blue LED for power indicator
- One red LED for FPGA program done indicator
- One green user LED
-
Two 0.8mm pitch 140-pin board-to-board expansion connectors bring out below
signals:
- One Gigabit Ethernet
- One USB OTG 2.0
- Two Serial ports
- Two I2C
- Two CAN BUS
* Serial ports, I2C and CAN signals will
be reused in PS part, or implemented through PL pins
- Two SPI (can be implemented through PL pins)
- ADC (one independent differential ADC, 16-channel ADC brought out through PL
pins)
- One SDIO
The MYD-C7Z010/20 Base Board
(MYB-C7Z010/20)
PS Unit
-
Four USB 2.0 Host ports (through USB Hub)
-
One RS232 (DB9 port)
-
One TF card slot (bootable)
-
One CAN interface
-
One 10/100/1000M Ethernet
-
One 2.54mm pitch 14-pin JTAG interface (PS, PL reused)
-
Battery backed RTC
-
One User Button (One I2C, can be connected to LCD and Resistive Touch Screen)
-
Jumpers
- One for booting selection from TF card or QSPI
- One for JTAG selection for using PS and PL reused or independent JTAG
configured through PL pins
- One for selection if adding FMC module to JTAG
PL Unit
-
One XADC interface
-
One Xilinx standard LPFMC interface
-
One HDMI interface (16-bit YCrCb, support 1080p display, do not support audio)
-
LCD/Touch screen interface (16-bit RGB, signals reused with HDMI, supports resistive and
capacitive touch screen)
-
Two LEDs
(one for FMC module detection, one for power indicator)
-
Three-channel PMoD (only for XC7Z020)
OS Support
Other MYIR's Xilinx Products
http://www.myirtech.com/xilinxseries.asp
Z-turn Board V2 Single Board Computer (based on Zynq-7010 / 7020)
Z-turn Lite Single Board Computer (based on Zynq-7010)
MYD-C7Z015 Development Board (MYC-C7Z015 as core board, Zynq-7015)
MYD-Y7Z010/20-V2 Development Board (MYC-Y7Z010/20-V2 as core board, Zynq-7010 / 7020 )
MYD-CZU3EG/4EV/5EV-V2 Development Board (MYC-CZU3EG/4EG/5EV-V2 as core board, ZU3EG/4EV/5EV)
FZ5 Card (AI Accelerator Card based on Zynq UltraScale+ ZU5EV MPSoC)
FZ3 Card - deep learning accelerator card (based on Xilinx Zynq UltraScale+ ZU3EG MPSoC)
|
Overview
