Shopping Cart | 中文网站
 
 

Development Environment

Xilinx SDSoC (1)

Single Board Computers

MYS-6ULX (NXP i.MX6UL/6ULL) (2)

Rico Board (TI AM437x) (1)

Z-turn Lite (Xilinx Z-7007S/7010) (1)

Z-turn Board (Xilinx Zynq-7010/20) (1)

MYS-SAM9X5 (Atmel SAM9X5) (5)

MYS-SAM9G45 (Atmel SAM9G45) (1)

MYS-S5PV210 (Samsung S5PV210) (1)

Development Boards

MYD-C7Z010/20 (Xilinx ZYNQ) (1)

MYD-C7Z015 (Xilinx ZYNQ) (1)

MYD-C437X (TI AM437x) (1)

MYD-C437X-PRU (TI AM437x) (1)

MYD-AM335X (TI AM335x) (1)

MYD-AM335X-J (TI AM335x) (1)

MYD-AM335X-Y (TI AM335x) (1)

MYD-JA5D4X (Atmel A5D4) (1)

MYD-SAMA5D3X (Atmel A5D3) (5)

MYD-SAMA5D3X-C (Atmel A5D3) (1)

MYD-JA5D2X (Atmel A5D2) (1)

MYD-SAM9X5 (Atmel SAM9X5) (5)

MYD-SAM9X5-V2 (Atmel SAM9X5) (5)

MYD-IMX28X (Freescale i.MX28) (1)

MYD-LPC435X (NXP LPC435x) (2)

MYD-LPC1788 (NXP LPC1788) (1)

MYD-LPC185X (NXP LPC185x) (2)

CPU Modules

MYC-C7Z010/20 (Xilinx ZYNQ) (1)

MYC-C7Z015 (Xilinx ZYNQ) (1)

MYC-C437X (TI AM437x) (1)

MYC-AM335X (TI AM335x) (1)

MCC-AM335X-Y (TI AM335x) (1)

MCC-AM335X-J (TI AM335x) (1)

MYC-IMX28X (Freescale i.MX28) (1)

MYC-JA5D4X (Atmel A5D4) (1)

MYC-SAMA5D3X (Atmel A5D3) (5)

MCC-SAMA5D3X-C (Atmel A5D3) (1)

MYC-JA5D2X (Atmel A5D2) (1)

MYC-SAM9X5 (Atmel SAM9X5) (5)

MYC-SAM9X5-V2 (Atmel SAM9X5) (5)

MYC-Exynos4412 (Samsung) (1)

MYC-S5PV210 (Samsung S5PV210) (1)

Add-on Options

Z-turn IO Cape (for Z-turn Board) (1)

MYB-6ULX (for MYS-6ULX) (1)

MY-LCD43TP LCD Module (1)

MY-LCD70TP LCD Module (1)

MY-LCD70TP-C LCD Module (1)

MY-CAM002U USB Camera Module (1)

MY-CAM011B BUS Camera Module (1)

MY-CU005U USB 3G Module (1)

MY-WF004S SDIO WiFi Module (1)

MY-WF003U USB WiFi Module (1)

MY-GPS008C GPS Module (1)

MY-ZB010C ZigBee Module (1)

MY-ZB010C-E ZigBee EVM (1)

MY-GPRS007C GPRS Module (1)

MY-UART012U Convertor (1)

MY-SODIMM200 Socket (1)

    Product Updates
          Products >  Single Board Computers >  MYS-6ULX (NXP i.MX6UL/6ULL) > MYS-6ULX Single Board Computer
 
MYS-6ULX Single Board Computer

MYS-6ULX Single Board Computer

- 528MHz NXP i.MX 6UltraLite / 6ULL ARM Cortex-A7 Processor
- 256MB DDR3, 256MB Nand Flash
- Ethernet, LCD, USB Host, Device, TF Card, Buttons, LED, IO…
- On Board WiFi Module for MYS-6ULX-IOT
- More Peripherals Extended by Optional Expansion Board
- Optional 4.3 or 7 inch LCD/TSP
- Two Variants Respectively for Industry 4.0 and IoT Applications
- Support Linux with Debian distribution
- Support Linux by Yocto Project with Ported QT
 



Description

Measuring only 70mm by 55mm, the MYS-6ULX is a high-performance low-cost Single Board Computer specially designed for Industry 4.0 (Industrie 4.0) and Internet of Things (IoT) applications. It is based on NXP’s i.MX 6UltraLite / 6ULL processor family which features the most efficient ARM Cortex-A7 core and can operate at speeds up to 696 MHz. It has two 2.0mm pitch 2x20-pin headers on board to allow extension of the controller signals and ports to the base board through headers and connectors, thus exposing more features of the i.MX 6UL / 6ULL ARM Cortex-A7 Processors, so it can also be used as a System-on-Module (SoM) for your next embedded design.


The MYS-6ULX has two variants of boards which are called MYS-6ULX-IND and MYS-6ULX-IOT to meet different applications. The MYS-6ULX-IND is targeting industry 4.0 applications and based on i.MX6UL series processors while the MYS-6ULX-IOT is oriented for IoT applications and using i.MX6ULL series processors. They share the same hardware circuit design and fully compatible in software but also have their own characteristics. The MYS-6ULX-IOT has additionally a USB based WiFi module with antenna on the board. The MYS-6ULX-IND can support -40 to +85 Celsius extended temperature operation, which makes the board more suitable for industrial control and communication applications. MYIR has ported Linux 4.1.15 for the board with Debian distribution as well as Yocto project with ported QT. MYIR has also provided an interesting demo to enable customers to experience Amazon Alexa Voice Service.


MYS-6ULX-IND Single Board Computer



MYS-6ULX-IOT Single Board Computer


MYIR has also designed an expansion board MYB-6ULX which is connected to the MYS-6ULX board through its onboard two 2.0mm pitch 2 x 20-pin expansion headers. The expansion board has extended one more Ethernet for MYS-6ULX and also added CAN, RS485, Audio, RTC and Camera functions which has further enhanced the performance of MYS-6ULX board. MYIR will offer optional LCD modules, Camera module, GPS module and GPRS module to add functionality to the boards, which would be a complete embedded system.

MYB-6ULX Expansion Board



MYB-6ULX Expansion Board mounted on MYS-6ULX Single Board Computer
(delivered without battery)




A Complete Embedded System based on NXP i.MX 6UL/6ULL Solution

Note: some modules will be supported in future as add-on options for the MYS-6ULX board.


Features


The MYS-6ULX Single Board Computer takes full features of the i.MX 6UltraLite / 6ULL processors. Below table list the features of the two variants of the MYS-6ULX boards to help customers make choices according to their requirements.


Features

MYS-6ULX-IND

MYS-6ULX-IOT

Dimensions

70mm x 55mm

PCB Layer

8-layer

Power Supply

5V/1A

Power Consumption

About 5V/0.25A (single board)

About 5V/0.4A (board + 4.3” LCD)

About 5V/0.8A (board + 7” LCD)

Working Temp.

-40°C~85°C

0°C~70°C

Target Applications

Industry 4.0

IoT

CPU

MCIMX6G2CVM05A

MCIMX6Y2DVM05A

DDR3

256MB (support up to 2GB)

Nand Flash

256MB (support 512MB/1GB)

eMMC

DNP (Reserved design)

Ethernet

10/100Mbps

USB

1 x USB Host
1 x USB Device

TF Card

1 x Micro SD card slot

Button

1 x Reset Button

1 x User Button

LED

1 x Power Indicator

2 x User LEDs

LCD Connector

24-bit RGB LCD & Touch Screen
(50-pin FPC connector)

Debug Connector

2.5mm pitch 3-pin Headers, TTL

Expansion Headers

Two 2.0mm pitch 2x20-pin Headers
(1 x Ethernet, 8 x UARTs, 4 x I2C, 2 x CAN, 4 x SPI, 8 x ADC, 4 x PWM, 2 x I2S, 1 x 8-bit Camera, 1 x JTAG, up to 46 x GPIOs)

WiFi Module

-

USB based, 2.4GHz, IEEE 802.11b/g/n standards

Software

Linux with Debian distribution (Amazon Alexa Voice Service Demo)
Linux by Yocto Project with Ported QT



70mm x 55mm, 4-layer PCB, 5V/1A USB Power Supply

Supports -40°C~85°C Working Temperature

1 x 10/100Mbps

1 x CAN

1 x RS485

1 x Micro USB Debug port

1 x Microphone, 1 x Headphone, 1 x Line In

1 x Camera Interface (30-pin FPC connector)

1 x RTC Battery Socket

1 x IO Expansion Header (2.0mm pitch 2 x 7-pin headers)

2 x 2.0mm pitch 2 x 20-pin female Header Connectors (connect with MYS-6ULX)


Note: the peripheral signals brought out to the expansion headers are listed in maximum number. Some signals are reused. Please refer to the board schematic and processor datasheet.



Hardware Features

i.MX 6UltraLite

The i.MX 6UltraLite processor family featuring an advanced implementation of a single ARM® Cortex®-A7 core, which operates at speeds up to 696 MHz. It includes an integrated power management module that reduces the complexity of external power supply and simplifies power sequencing. Each processor in this family provides various memory interfaces, including 16-bit LPDDR2, DDR3, DDR3L, raw and managed NAND flash, NOR flash, eMMC, Quad SPI and a wide range of other interfaces for connecting peripherals such as WLAN, Bluetooth™, GPS, displays and camera sensors.


MYIR is using the 14 x 14mm, 0.8 mm ball pitch, 289 MAPBGA package i.MX6UL application processor on the MYS-6ULX-IND board which provides multiple compatible options of G0, G1, G2 and G3 sub families. The MCIMX6G2CVM05A is the default part with the board and MYIR offers optional configurations for mass customization.


Feature

MCIMX6G0

MCIMX6G1

MCIMX6G2

MCIMX6G3

Speed

528 MHz

528 MHz, 696 MHz

528 MHz, 696 MHz

528 MHz

Cache

32 KB-I, 32 KB-D

32 KB-I, 32 KB-D
128 KB L2

32 KB-I, 32 KB-D
128 KB L2

32 KB-I, 32 KB-D
128 KB L2

OCRAM

128 KB

128 KB

128 KB

128 KB

DRAM

16-bit LP-DDR2,
DDR3/DDR3L

16-bit LP-DDR2,
DDR3/DDR4L

16-bit LP-DDR2,
DDR3/DDR5L

16-bit LP-DDR2,
DDR3/DDR6L

eFuse

512-bit

1024-bit

1536-bit

2048-bit

NAND (BCH40)

Yes

Yes

Yes

Yes

EBI

Yes

Yes

Yes

Yes

Ethernet

10/100-Mbit/s x 1

10/100-Mbit/s x 1

10/100-Mbit/s x 2

10/100-Mbit/s x 2

USB

OTG, HS/FS x 1

OTG, HS/FS x 2

OTG, HS/FS x 2

OTG, HS/FS x 2

CAN

0

1

2

2

Security

Basic

TRNG, Crypto Engine
(AES/TDES/SHA), Secure Boot

TRNG, Crypto Engine
(AES/TDES/SHA), Secure Boot

TRNG, Crypto Engine (AES
with DPA/TDES/SHA/RSA),
Secure Boot, tamper monitor,
PCI4.0 pre-certification,
OTF DRAM encryption

Graphic

None

None

PxP

PxP

CSI

None

None

24-bit Parallel CSI

24-bit Parallel CSI

LCD

None

None

24-bit Parallel LCD

24-bit Parallel LCD

Quad SPI

1

1

1

1

SDIO

2

2

2

2

UART

4

8

8

8

I2C

2

4

4

4

SPI

2

4

4

4

I2S/SAI

1

3

3

3

S/PDIF

1

1

1

1

Timer/PWM

Timer x 2, PWM x 4

Timer x 4, PWM x 8

Timer x 4, PWM x 8

Timer x 4, PWM x 8

12-bit ADC

1 x 10-ch.

1 x 10-ch.

2 x 10-ch.

2 x 10-ch.

i.MX 6UltraLite Device Options

i.MX 6ULL

The i.MX 6ULL processor which is a high-performance, ultra-efficient processor family featuring an advanced implementation of a single ARM® Cortex®-A7 core and capable of operating at speeds up to 528 MHz. The i.MX 6ULL is supported by discrete component power circuitry. It is a cost down version of i.MX 6UltraLite with fewer security features and lower maximum CPU frequency, but adding ePD support.


MYIR is using the 14 x 14mm, 0.8 mm ball pitch, 289 MAPBGA package i.MX6ULL application processor on the MYS-6ULX-IOT board which provides multiple compatible options of Y0, Y1 and Y2 sub families. The MCIMX6Y2DVM05A is the default part with the board and MYIR offers optional configurations for mass customization.


Feature

MCIMX6Y0

MCIMX6Y1

MCIMX6Y2

Core

ARM® Cortex-A7

ARM® Cortex-A7

ARM® Cortex-A7

Speed

528 MHz

528 MHz

528 MHz

Cache

32 KB-I, 32 KB-D

32 KB-I, 32 KB-D
128 KB L2

32 KB-I, 32 KB-D
128 KB L2

OCRAM

128 KB

128 KB

128 KB

DRAM

16-bit LP-DDR2,
DDR3/DDR3L

16-bit LP-DDR2,
DDR3/DDR4L

16-bit LP-DDR2,
DDR3/DDR5L

eFuse

256-bit

256-bit

256-bit

NAND (BCH40)

Yes

Yes

Yes

EBI

Yes

Yes

Yes

Ethernet

10/100-Mbit/s x 1

10/100-Mbit/s x 1

10/100-Mbit/s x 2

USB

OTG, HS/FS x 1

OTG, HS/FS x 2

OTG, HS/FS x 2

CAN

0

1

2

Graphic

None

None

PxP

CSI

None

None

16-bit Parallel CSI

LCD

None

None

24-bit Parallel LCD

Quad SPI

1

1

1

SDIO

2

2

2

UART

4

8

8

I2C

2

4

4

SPI

2

4

4

I2S/SAI

1

3

3

ESAI

1

1

1

S/PDIF

1

1

1

Timer/PWM

Timer x 2, PWM x 4

Timer x 4, PWM x 8

Timer x 4, PWM x 8

12-bit ADC

1 x 10-ch.

1 x 10-ch.

2 x 10-ch.

Security

None

AES-128, HAB

AES-128, HAB

Temperature

-40°C to 105°C (Tj)

-40°C to 105°C (Tj)

0°C to 90°C (Tj)

i.MX 6ULL Device Options



Function Block Diagram of MYS-6ULX-IND


Function Block Diagram of MYS-6ULX-IOT


Dimension Chart of MYS-6ULX Single Board Computer



Dimension Chart of MYB-6ULX Expansion Board



Software Features

The MYS-6ULX Single Board Computer is ready to run Linux with Debian distribution or by Yocto project with QT. Many peripheral drivers are in source code to help accelerate customers’ designs with a stable and reliable hardware and software platform. The software features are summarized as below:


Item

Features

Description

Bootstrap program

u-boot

The primary bootstrap (source code)

Linux Kernel

Version

Linux 4.1.15 (source code)

Linux Drivers

USB

HOST and Device drivers (source code)

Ethernet

Ethernet driver (source code)

MMC/SD

MMC/SD card driver (source code)

NandFlash

Nand Flash driver (source code)

UART

UART driver (source code)

LCD Controller

LCD driver (source code),
supporting MYIR’s 4.3- and 7- inch LCD module

Touch Panel

Touch screen driver (source code),
supporting 4-wire capacitive and resistive touch screen

CAN

CAN driver (source code)

Camera

Camera driver (source code),

Supporting MYIR’s MY-CAM011B Camera module

Audio

Audio driver (source code)

RTC

RTC driver (source code)

Button

Button driver (source code)

LED

LED driver (source code)

File System

Yocto

Including QT 5.0 (source code)

Debian

Binary file and Building Instructions

Compiler Tool Chain

Linaro GCC 4.9 hf

Binary file







Relative Download and Links

You can download relative chip datasheet, products datasheet, user manual, software package from below. Any inquiry, please contact MYIR


1 MYS-6ULX Single Board Computer Overview 1.56 MB
2 NXP i.MX 6ULL Datasheet 1.3 MB
3 NXP i.MX 6UltraLite Datasheet 2.3 MB
4 MYS-6ULX Dimensions 99 KB
5 MYS-6ULX Single Board Computer Schematic 340 KB



MYS-6ULX-IND  Top-view


MYS-6ULX-IND  Bottom-view


MYS-6ULX-IOT Top-view

MYS-6ULX-IOT Bottom-view


MYS-6ULX + MYB-6ULX




MYS-6ULX + MYB-6ULX








Price and Ordering


Item

Part No.

Unit Price

Ordering

MYS-6ULX Single Board Computer

MYS-6ULX-IND

USD26.8

MYS-6ULX-IOT
USD24.8

MYB-6ULX Expansion Board

MYB-6ULX   USD21.2

MY-LCD43TP 4.3 inch LCD Module with touch screen

MY-TFT043RV2

USD60

MY-LCD70TP 7 inch LCD Module with resistive touch screen

MY-TFT070RV2

USD99

MY-LCD70TP-C 7 inch LCD Module with capacitive touch screen

MY-TFT070CV2

USD99

MY-CAM011B BUS Camera Module MY-CAM011B USD29







More FAQ >>


1. Examples for writing led driver on MYS-6ULX-IND single board computer

Question:
I want to write a led driver based on MYS-6ULX-IND single board computer, but I don’t know how to configure mys-imx6ul-14x14-evk.dts, are there any examples for reference?

Answer:
You can refer to the configuration of leds on mys-imx6ul-14x14-evk.dts, pinctrl_leds is the configuration of pinmux.

       leds {

              compatible = "gpio-leds";

              pinctrl-names = "default";

              pinctrl-0 = <&pinctrl_leds>;

        

              led0: cpu {

                       label = "user";

                       gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;

                       default-state = "off";

           };

         

              led1: user {

                      label = "cpu";

                      gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;

                      default-state = "on";

                      linux,default-trigger = "heartbeat";
           };
       };



2. How can I run Linux on MYS-6ULX Single Board Computer?

Question:
How can I run Linux on MYS-6ULX Single Board Computer?

Answer:
You can run Linux on NAND Flash by default or via SD card.

3. How to get SSH, Telnet, FTP package for the MYS-6ULX board?

Question:
How to get SSH, Telnet, FTP package for the MYS-6ULX board?

Answer:
You can use apt-get command to install it from Debian software repository.

More FAQ >>


 

Room 04, 6th Floor, Building No.2, Fada Road, Yunli Smart Park, Bantian, Longgang District, Shenzhen, Guangdong, China 518129
E-mail: sales@myirtech.com or myirtech@yahoo.com  Phone: +86-755-22984836  Fax: +86-755-25532724
Copyright © MYIR Tech Limited 2011-2017 all rights reserved.