MYD-YR3562 Development Board

The MYD-YR3562 Development Board is powered by the RK3562/RK3562J processor, a high-performance, low-power chip from Rockchip designed for industrial automation and consumer electronics. This processor features up to 2.0GHz Quad ARM Cortex-A53 cores, a 1 TOPs NPU (exclusive to the RK3562 CPU), a 3D GPU, and 4K video codecs. The board supports the Linux 6.1.99 OS and comes with comprehensive documentation and software packages. It can operate within an industrial temperature range of -40 to 85 Celsius or a commercial range of 0 to 70 Celsius.

The MYD-YR3562 Development Board is built around the MYC-YR3562 System-On-Module (SOM), leveraging the RK3562/RK3562J's advanced features through a 164-pin Castellated-Hole and a 58-pin LGA expansion interface. It is equipped with two USB 3.0 ports, one Gigabit Ethernet, two 10/100Mbps Ethernet, and an integrated WiFi/Bluetooth module. Storage options include a Micro SD card slot and an M.2 NVMe SSD-compatible PCIe slot. Multimedia capabilities are extensive, with HDMI, MIPI-DSI, three MIPI-CSI video inputs, and a 3.5mm Audio interface. Peripheral expansion is possible via the RPI Interface (GPIO/I2C/UART/SPI/CAN) and MiFAN Interface (GPIO/I2C/UART/SPI/USB2.0), allowing for customizable projects and an enhanced development experience.

MYD-YR3562 Development Board Top-view (RK3562 CPU)

MYD-YR3562 Development Board Top-view (RK3562 CPU)

The MYD-YR3562 is equipped with a 12V/3A power adapter, a USB Type-C cable, a WiFi/Bluetooth antenna, and a quick start guide. MYIR provides optional accessories, such as the MY-CAM004M 4AHD-to-MIPI Camera Module, MY-CAM005M MIPI Camera Module, and MY-MIPI101C 10.1-inch LCD Module. The MYD-YR3562J-GK kit, featuring the RK3562J CPU, includes the MY-ICEB001 expansion board, which adds three USB2.0 ports, one RS232 port, two RS485 ports, two CAN interfaces, and an M.2 Socket for a USB-based 4G/5G LTE Module with a SIM card holder, operating within a temperature range of -40 to 85 degrees Celsius. These enhancements substantially broaden the board's functionality, providing users with the flexibility to tailor the solution to their unique project needs.

MYD-YR3562 Development Board (RK3562J version) Integrates with the MY-ICEB001 Expansion Board

MYD-YR3562 Development Board (RK3562J version) Top-view

MYD-YR3562 Development Board (RK3562J version) Bottom-view

MY-ICEB001 Expansion Board

Features

Mechanical Parameters

• Dimensions: 90mm x 120mm (base board), 45mm x 43mm (SOM)
• PCB Layers: 6-layer design (base board), 10-layer design (SOM)
• Power supply: 12V/3A (base board); 3.3V/2A (SOM)
• Working temperature: 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)
  (WiFi/BT Module: -30~85 Celsius)
  
  

The MYD-YR3562 Controller Board (MYC-YR3562)

MYC-YR3562 Top-view and Bottom-view

Processor

• Rockchip RK3562 / RK3562J processor
  - Quad-core Arm Cortex-A53 at up to 2.2 GHz (RK3562)
  Quad-core Arm Cortex-A53 at up to 1.2GHz/1.8GHz (RK3562J at normal mode/overdrive mode)
  - Arm Mali-G52-2EE 3D GPU
  - 6 TOPS NPU supports INT4/8/16/FP16/BF16/TF32
  - Supports up to 1080p@60fps H.264 or 4K@30fps H.265 video decoding and up to 1080p@60fps H.264 video encoding
  
  

• Memory and Storage
  - 1GB/2GB LPDDR4
  - 8GB/16GB eMMC
  - 32Kbit EEPROM
  
  

• Peripherals and Signals Routed to Pins
  - Power Management IC (PMIC)
  - 1.0 mm pitch 164-pin Castellated-Hole and 58-pin LGA expansion interfaces
  - 1x RGMII
  - 1x RMII
  - 1x USB3.0/2.0 OTG
  - 1x USB2.0 Host
  - 1x PCIE 2.1/USB3.0 (Multi-PHY)
  - 3x SPI
  - 2x SDIO 3.0
  - 10x UART
  - 2x CAN 2.0B
  - 5x I2C
  - 16x PWM
  - 2x SARADC
  - 2x MIPI CSI
  - 1x MIPI DSI
  - 1x 24-bit RGB
  - 1x LVDS
  - 3x SAI
  - 1x SPDIF
  - 1x 8-ch PDM
  Note: the peripheral signals brought out to the expansion interface are listed in maximum number. Some signals are reused. Please refer to the processor datasheet and SOM pin-out description file.

The MYD-YR3562 Development Board Base Board

• 1x Power Jack
• 5x Buttons (Update, PWR, V+, V-, RESET)
• 3x LEDs (1x PWR LED, 1x RUN LED, 1x USR LED)
• 1x Micro SD card slot
• 1x M.2 NVME PCIE SSD socket
• 1x Debug UART (USB Type-C) ·
• 1x 10/100/1000Mbps Ethernet (RJ45)
• 2x 10/100Mbps Ethernet (RJ45)
• 1x WiFi/Bluetooth Module (complies with IEEE 802.11a/b/g/n/ac standard and supports BT 5.2) ·
• 2x USB3.0 Interfaces (Type-A)
• 1x HDMI Interface ·
• 1x MIPI-DSI Interface (0.5mm pitch 30-pin FPC connector)
  Support MYIR’s MY-MIPI101C 10.1-inch MIPI Module 1920*1200 resolution
• 3x MIPI-CSI Interfaces (0.5mm pitch 30-pin FPC connector)
  Support MYIR’s MY-CAM004M and MY-CAM005M MIPI Camera Modules
• 1x 3.5mm Audio Interface
• 1x Speaker Interface
• 2x Extension Interfaces (2.54mm pitch 2x 20-pin expansion connector)
  - RPI Interface (GPIO/I2C/UART/SPI/CAN, compatible with Raspberry PI standard 40-pin extension interface)
  - MiFAN Interface (GPIO/I2C/UART/SPI/USB2.0)

The MY-ICEB Expansion Board (for MYD-LR3576J-GK)

• 1x Power Input (Phoenix connector)
• 2x Buttons (RESET, USER)
• 2x LEDs (1x RUN LED, 1x USR LED)
• 1x RS232 Serial Port
• 2x RS485 Serial Ports
• 2x CAN Interfaces
• 3x USB2.0 ports (Type-A)
• 1x M.2 Socket for a USB-based 4G LTE Module
• 1x SIM Card Slot
• 2x Extension interfaces (2.54mm pitch 2x 20-pin connector)
• RPI interface (GPIO/I2C/UART/SPI/CAN)
• MiFAN interface (GPIO/I2C/UART/SPI/USB/PWM)

OS Support

• Linux 6.1